product quality<\/h1><\/div><\/div><\/div><\/div><\/div>Crafted Plano Safety Eyewear<\/h6><\/div>product quality<\/h1><\/div><\/div><\/div><\/div><\/div>What is the difference between eyewear and safety eyewear?<\/h4><\/a><\/li>
Testing procedures for eyewear frames and eyewear lenses<\/h4><\/a><\/li>
Additional testing procedures for eyewear frames<\/h4><\/a><\/li>
Additional testing procedures for eyewear lenses<\/h4><\/a><\/li>
Certification and Labelling<\/h4><\/a><\/li><\/ul><\/div>What is the difference between eyewear and safety eyewear?<\/h4><\/a><\/li><\/ul><\/div>Safety eyewear for daily industrial use, in DIY or medical environments must be able to resist enormous pressures. Depending on the industry, an employee can be confronted with various hazards in the work-place. With many tasks there are also combinations of these hazards. Because of this, safety eyewear must undergo a stringent testing procedure.<\/p>\nThe testing of the eyewear\u2019s mechanical stability results in an allocation into the protection category EN166S or the higher category, EN166F. The allocation of the mechanical stability is done in the same manner for both the eyewear frame and the eyewear lenses. Should a frame and lenses have differing results, the eyewear as a whole will be allocated the lower certification (EN166S).<\/p>\n<\/div><\/div><\/div>
Possible dangers at the workplace<\/h4><\/div>- <\/i><\/span>\n
Mechanical dangers from foreign bodies<\/p>\n<\/div><\/li>
- <\/i><\/span>\n
Optical radiation such as UV or IR radiation, laser beams and radiation from welding operations<\/p>\n<\/div><\/li>
- <\/i><\/span>\n
Biological and chemical substances<\/p>\n<\/div><\/li>
- <\/i><\/span>\n
Electrical dangers<\/p>\n<\/div><\/li><\/ul><\/div><\/div><\/div>
In the case of safety eyewear for spectacle wearers, eyewear frames and eyewear lenses are combined. The frames as well as the various lens variants are therefore tested and certified separately. Below we provide an overview of the individual testing procedures that both the eyewear frames and the eyewear lenses are subjected to. This explains the high quality demands that are placed on our safety eyewear.<\/p>\n<\/div>
Personal eyewear is not safety eyewear<\/h3><\/div>Personal eyewear is not suitable for safety eyewear, because they do not provide sufficient protection against the hazards in the workplace. However, employees often use old personal eyewear, the eyewear lenses of which in most cases have redundant optical strengths. Even in the case of normal and routine work processes, there is always the danger that the eyes can be affected by things like metal shavings, wood splinters or liquids. Such injuries can lead to permanent visual impairment or even blindness. Discerning employers make suitable eye protection available to all at risk. Customised corrective safety eyewear are to be explicitly recommended Personal corrective eyewear does not afford the required safety effect. Goggles, over-goggles or visors can be worn over personal eyewear in the case of short-term use that lasts only a few minutes. The insurance association however explicitly recommends the use of prescription safety eyewear, because this is the only way to combine both the safety function and corrective effect (BGR 192 Section 3.2.2.2, Prescription Safety Eyewear).<\/p>\n<\/div><\/div>
Crafted Plano Safety Eyewear<\/h6><\/div>product quality<\/h1><\/div><\/div><\/div><\/div><\/div>What is the difference between eyewear and safety eyewear?<\/h4><\/a><\/li>
Testing procedures for eyewear frames and eyewear lenses<\/h4><\/a><\/li>
Additional testing procedures for eyewear frames<\/h4><\/a><\/li>
Additional testing procedures for eyewear lenses<\/h4><\/a><\/li>
Certification and Labelling<\/h4><\/a><\/li><\/ul><\/div>What is the difference between eyewear and safety eyewear?<\/h4><\/a><\/li><\/ul><\/div>Safety eyewear for daily industrial use, in DIY or medical environments must be able to resist enormous pressures. Depending on the industry, an employee can be confronted with various hazards in the work-place. With many tasks there are also combinations of these hazards. Because of this, safety eyewear must undergo a stringent testing procedure.<\/p>\nThe testing of the eyewear\u2019s mechanical stability results in an allocation into the protection category EN166S or the higher category, EN166F. The allocation of the mechanical stability is done in the same manner for both the eyewear frame and the eyewear lenses. Should a frame and lenses have differing results, the eyewear as a whole will be allocated the lower certification (EN166S).<\/p>\n<\/div><\/div><\/div>
Possible dangers at the workplace<\/h4><\/div>- <\/i><\/span>\n
Mechanical dangers from foreign bodies<\/p>\n<\/div><\/li>
- <\/i><\/span>\n
Optical radiation such as UV or IR radiation, laser beams and radiation from welding operations<\/p>\n<\/div><\/li>
- <\/i><\/span>\n
Biological and chemical substances<\/p>\n<\/div><\/li>
- <\/i><\/span>\n
Electrical dangers<\/p>\n<\/div><\/li><\/ul><\/div><\/div><\/div>
In the case of safety eyewear for spectacle wearers, eyewear frames and eyewear lenses are combined. The frames as well as the various lens variants are therefore tested and certified separately. Below we provide an overview of the individual testing procedures that both the eyewear frames and the eyewear lenses are subjected to. This explains the high quality demands that are placed on our safety eyewear.<\/p>\n<\/div>
Personal eyewear is not safety eyewear<\/h3><\/div>Personal eyewear is not suitable for safety eyewear, because they do not provide sufficient protection against the hazards in the workplace. However, employees often use old personal eyewear, the eyewear lenses of which in most cases have redundant optical strengths. Even in the case of normal and routine work processes, there is always the danger that the eyes can be affected by things like metal shavings, wood splinters or liquids. Such injuries can lead to permanent visual impairment or even blindness. Discerning employers make suitable eye protection available to all at risk. Customised corrective safety eyewear are to be explicitly recommended Personal corrective eyewear does not afford the required safety effect. Goggles, over-goggles or visors can be worn over personal eyewear in the case of short-term use that lasts only a few minutes. The insurance association however explicitly recommends the use of prescription safety eyewear, because this is the only way to combine both the safety function and corrective effect (BGR 192 Section 3.2.2.2, Prescription Safety Eyewear).<\/p>\n<\/div><\/div>
product quality<\/h1><\/div><\/div><\/div><\/div><\/div>What is the difference between eyewear and safety eyewear?<\/h4><\/a><\/li>
Testing procedures for eyewear frames and eyewear lenses<\/h4><\/a><\/li>
Additional testing procedures for eyewear frames<\/h4><\/a><\/li>
Additional testing procedures for eyewear lenses<\/h4><\/a><\/li>
Certification and Labelling<\/h4><\/a><\/li><\/ul><\/div>What is the difference between eyewear and safety eyewear?<\/h4><\/a><\/li><\/ul><\/div>Safety eyewear for daily industrial use, in DIY or medical environments must be able to resist enormous pressures. Depending on the industry, an employee can be confronted with various hazards in the work-place. With many tasks there are also combinations of these hazards. Because of this, safety eyewear must undergo a stringent testing procedure.<\/p>\nThe testing of the eyewear\u2019s mechanical stability results in an allocation into the protection category EN166S or the higher category, EN166F. The allocation of the mechanical stability is done in the same manner for both the eyewear frame and the eyewear lenses. Should a frame and lenses have differing results, the eyewear as a whole will be allocated the lower certification (EN166S).<\/p>\n<\/div><\/div><\/div>
Possible dangers at the workplace<\/h4><\/div>- <\/i><\/span>\n
Mechanical dangers from foreign bodies<\/p>\n<\/div><\/li>
- <\/i><\/span>\n
Optical radiation such as UV or IR radiation, laser beams and radiation from welding operations<\/p>\n<\/div><\/li>
- <\/i><\/span>\n
Biological and chemical substances<\/p>\n<\/div><\/li>
- <\/i><\/span>\n
Electrical dangers<\/p>\n<\/div><\/li><\/ul><\/div><\/div><\/div>
In the case of safety eyewear for spectacle wearers, eyewear frames and eyewear lenses are combined. The frames as well as the various lens variants are therefore tested and certified separately. Below we provide an overview of the individual testing procedures that both the eyewear frames and the eyewear lenses are subjected to. This explains the high quality demands that are placed on our safety eyewear.<\/p>\n<\/div>
Personal eyewear is not safety eyewear<\/h3><\/div>Personal eyewear is not suitable for safety eyewear, because they do not provide sufficient protection against the hazards in the workplace. However, employees often use old personal eyewear, the eyewear lenses of which in most cases have redundant optical strengths. Even in the case of normal and routine work processes, there is always the danger that the eyes can be affected by things like metal shavings, wood splinters or liquids. Such injuries can lead to permanent visual impairment or even blindness. Discerning employers make suitable eye protection available to all at risk. Customised corrective safety eyewear are to be explicitly recommended Personal corrective eyewear does not afford the required safety effect. Goggles, over-goggles or visors can be worn over personal eyewear in the case of short-term use that lasts only a few minutes. The insurance association however explicitly recommends the use of prescription safety eyewear, because this is the only way to combine both the safety function and corrective effect (BGR 192 Section 3.2.2.2, Prescription Safety Eyewear).<\/p>\n<\/div><\/div>
What is the difference between eyewear and safety eyewear?<\/h4><\/a><\/li>
Testing procedures for eyewear frames and eyewear lenses<\/h4><\/a><\/li>
Additional testing procedures for eyewear frames<\/h4><\/a><\/li>
Additional testing procedures for eyewear lenses<\/h4><\/a><\/li>
Certification and Labelling<\/h4><\/a><\/li><\/ul><\/div>
What is the difference between eyewear and safety eyewear?<\/h4><\/a><\/li><\/ul><\/div>
Safety eyewear for daily industrial use, in DIY or medical environments must be able to resist enormous pressures. Depending on the industry, an employee can be confronted with various hazards in the work-place. With many tasks there are also combinations of these hazards. Because of this, safety eyewear must undergo a stringent testing procedure.<\/p>\nThe testing of the eyewear\u2019s mechanical stability results in an allocation into the protection category EN166S or the higher category, EN166F. The allocation of the mechanical stability is done in the same manner for both the eyewear frame and the eyewear lenses. Should a frame and lenses have differing results, the eyewear as a whole will be allocated the lower certification (EN166S).<\/p>\n<\/div><\/div><\/div>
Possible dangers at the workplace<\/h4><\/div>
- <\/i><\/span>\n
Mechanical dangers from foreign bodies<\/p>\n<\/div><\/li>
- <\/i><\/span>
\nOptical radiation such as UV or IR radiation, laser beams and radiation from welding operations<\/p>\n<\/div><\/li>
- <\/i><\/span>
\nBiological and chemical substances<\/p>\n<\/div><\/li>
- <\/i><\/span>
\nElectrical dangers<\/p>\n<\/div><\/li><\/ul><\/div><\/div><\/div>
In the case of safety eyewear for spectacle wearers, eyewear frames and eyewear lenses are combined. The frames as well as the various lens variants are therefore tested and certified separately. Below we provide an overview of the individual testing procedures that both the eyewear frames and the eyewear lenses are subjected to. This explains the high quality demands that are placed on our safety eyewear.<\/p>\n<\/div>
Personal eyewear is not safety eyewear<\/h3><\/div>
Personal eyewear is not suitable for safety eyewear, because they do not provide sufficient protection against the hazards in the workplace. However, employees often use old personal eyewear, the eyewear lenses of which in most cases have redundant optical strengths. Even in the case of normal and routine work processes, there is always the danger that the eyes can be affected by things like metal shavings, wood splinters or liquids. Such injuries can lead to permanent visual impairment or even blindness. Discerning employers make suitable eye protection available to all at risk. Customised corrective safety eyewear are to be explicitly recommended Personal corrective eyewear does not afford the required safety effect. Goggles, over-goggles or visors can be worn over personal eyewear in the case of short-term use that lasts only a few minutes. The insurance association however explicitly recommends the use of prescription safety eyewear, because this is the only way to combine both the safety function and corrective effect (BGR 192 Section 3.2.2.2, Prescription Safety Eyewear).<\/p>\n<\/div><\/div>
- <\/i><\/span>
- <\/i><\/span>
![\"infield_test](\"https:\/\/infield-safety.com\/wp-content\/uploads\/2023\/02\/infield_prfverfahren7.jpg\")
<\/p>\n![\"infield](\"https:\/\/infield-safety.com\/wp-content\/uploads\/2023\/02\/infield_kennzeichnung-DIN-Siegel.png\")
<\/p>\n![\"markings_glasses\"](\"https:\/\/infield-safety.com\/wp-content\/uploads\/2023\/01\/kennzeichnungen_01.jpg\")
<\/p>\n![\"markings](\"https:\/\/infield-safety.com\/wp-content\/uploads\/2023\/01\/kennzeichnungen_02.jpg\")
<\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"100-width.php","meta":{"footnotes":""},"class_list":["post-8619","page","type-page","status-publish","hentry"],"yoast_head":"\n